۲ کیلو کاغذ مرکز تامین‌کنندگان صنایع سلولزی

آرشیو برچسب های: recycling

Voith and Sun Paper achieve early start-up of Nanning PM 2 and PM 3 packaging paper machine

Recently, Sun Paper’s two state-of-the-art packaging paper machines PM 2 and PM 3 were successfully commissioned at the Nanning, China site within one month. PM 3 successfully passed the tests in only three weeks and achieved a record-breaking start-up time of only one hour from stock on wire to the first saleable paper roll. With the start-up of the two state-of-the-art XcelLine machines from Voith, Sun Paper consolidates its leading position in the global paper industry and sets another milestone in the long-standing cooperation between the two companies.

The exceptional performance is the result of many years of trust and close cooperation between the Sun Paper and Voith teams. The daily exchange of knowledge and thorough project preparation led to significantly reduced downtimes during project implementation.

 

خواندن ادامه مطلب

Oxygen reactor feed MC pump improves O2 delignification

An Indian pulp and paper customer noticed that their MC pump was not up to par and sought help in reaching the targets on their production line. They suffered from low kappa reduction and high chemical consumption in the oxygen delignification stage. This was mainly due to the O2 stage feed pump limiting the pulp consistency. Their existing, ill-performing MC pump was not able to pump a consistency higher than 7%. Because of this, the steam capacity of the mill was not able to heat the pulp flow to the target temperature. Also, the desired top pressure in the oxygen reactor was not achieved.

The customer contacted Sulzer to analyze the O2 stage, calculate the pumping head at predetermined reactor pressures, and select more suitable and efficient MC equipment to reach the target process conditions. Sulzer’s experts visited the mill site, analyzed the whole pumping system, and calculated the required pump duty point. As a result of the thorough research, the client’s old pump was replaced by Sulzer’s MCE22-100-V, a high-quality MC pump with internal degassing.

 

خواندن ادامه مطلب

Sappi Cloquet dissolving pulp facility completes the Higg FEM assessment

Sappi Limited, a leading producer of dissolving pulp sold under the brand name Verve, continues to reach new milestones by completing the Higg Facility Environmental Management (FEM) verification audit at its Cloquet mill. Based in Northern Minnesota, USA, the mill is one of the leading dissolving pulp facilities to complete this external verification process. A final score of 91.5% was achieved which reinforces and demonstrates the sound environmental practices employed by the mill. Supporting the call to accelerate transparency in the textile and apparel sector, a detailed performance report will be made available to all key stakeholders on request.

Developed by the Sustainable Apparel Coalition (SAC), the Higg FEM is part of a suite of tools that enables manufacturing facilities of all sizes to measure and score their environmental performance against a standard set of criteria, allowing for meaningful and credible performance benchmarking in the apparel and textile sector. Across topics such as water use, carbon emissions and waste management, the Higg Index can be used by consumer goods brands, retailers, manufacturers, governments, NGOs and consumers to inform their individual sustainability strategies and drive collective industry transformation.

 

خواندن ادامه مطلب

Ilim Group appoints new CEO

The Board of Directors appointed Aleksei Lomko as Chief Executive Officer of  Russian JSC Ilim Group effective from October 30, 2023. Aleksei Lomko is one of key opinion leaders in corporate law, management, legal support, and re-engineering of large companies.

 

Mr Lomko is a graduate of the Ural Legal Academy and holds MBA degrees from the Northwestern University (U.S.) and Hong Kong University of Science and Technology.

He joined Ilim Group in 2005 as Deputy Director Legal.

Aleksei stood at the origin of the corporate formation of Ilim Group. In 2007, he took charge of the Group’s Legal Department that provided legal support for the establishment of a Russian-American joint venture and its investment activity.

When the management architecture was changed in 2013, Mr Lomko was appointed Vice President Legal and later in 2018 became Senior Vice President Legal. He interacted directly with the Board of Directors and served as acting CEO on multiple occasions.

Aleksei received awards for his excellent performance, including those from Ilim Group’s Board of Directors.

خواندن ادامه مطلب

Valmet has received a major order of multiple technologies from Liansheng Pulp & Paper in China

Valmet has received a major order from Liansheng Pulp & Paper (Zhangzhou) in Fujian Province in China covering multiple technology deliveries for the customer’s Zhangpu site. Valmet will supply a coated board making line (BM 2) with related automation systems, bleached chemi-thermo mechanical pulp (BCTMP) technology and two small size tissue machines (TM 5 and TM 6). In addition, Valmet will supply four tissue machine headboxes for tissue machines TM 7, TM 8, TM 9 and TM 10 at the same site.

The order of the coated board making line, BCTMP technology, two tissue machines and four tissue machine headboxes were included in Valmet’s orders received of the third quarter 2023. The value of the order will not be disclosed.

The start-up of the coated board machine and BCTMP technology are scheduled for the third quarter of 2025, the tissue machines for the fourth quarter of 2024, and tissue machine headboxes for the third quarter of 2024.

 

خواندن ادامه مطلب

Asia Symbol brings in ABB to provide manufacturing execution system at three tissue mills in China

As Asia Symbol Group, one of the biggest wood pulp producers in China, expands its pulp and paper business into tissue manufacturing, it has selected long-term strategic partner ABB to deliver the ABB Ability™ Manufacturing Execution System (MES) and system integration at three of its tissue mills in China.

This latest contract for mills in Guangdong, Shandong and Jiangxi affirms the strong, long-standing relationship between ABB and Asia Symbol, part of the global RGE Group (Royal Golden Eagle).

In recent years, this has seen the provision of paper machine drives and quality control system (QCS) products, and the successful extension of ABB’s MES service to Asia Symbol’s three fine paper production lines in Guangdong.

 

خواندن ادامه مطلب

Essity reuses more than half of France’s recycled food and beverage packaging

The hygiene and health company Essity has inaugurated the world’s first production line for professional hygiene tissue products where the raw material consists of used food and milk packaging. The facility recycles 25,000 tons per year, equivalent to 60% of all collected, sorted and recycled food and beverage cartons in France.

Since 2008, Essity’s plant in Hondouville has been the leader in recycling paper fiber from food and beverage packaging in France. The latest expansion has increased the recycling capacity by 40%. In addition to increased recycling capacity, the process also enables the recycling of almost all the materials in the packaging, including plastic and aluminum. Essity uses the fiber raw material to manufacture tissue products under the Tork brand.

Essity is constantly developing new methods to reuse materials and optimize resources, with the aim of achieving net zero emissions by 2050. The company has similar recycling initiatives in Germany, the Netherlands and most recently in Ecuador, where Essity is collaborating with McDonald’s and the company ReciVeci to recycle paper cups from fast-food restaurants.

“A truly circular society can only be achieved if there is integrated collaboration between all members of the value chain, and our production plant in Hondouville is a role model in end to-end circular economy. The production facility provides cost-efficient and sustainable production while we take important steps toward a world with zero landfill,” says Donato Giorgio, President, Global Supply Chain at Essity.

France is Essity’s second largest market in Europe with approximately 2,300 employees and annual sales of SEK 11.7bn. Essity manufactures and sells hygiene and health products under leading brands, such as Actimove, Cutimed, Delta-Cast, Demak’Up, JOBST, Leukoplast, Lotus, Nana, Okay, TENA and Tork.

خواندن ادامه مطلب

Metsä Board commences change negotiations on possible temporary layoffs in Finland

Metsa Board, part of Metsa Group, will initiate change negotiations on possible temporary layoffs for its paperboard and BCTMP mills in Finland. The negotiations involve a total of approximately 1,100 employees at the Joutseno, Kaskinen, Kemi, Kyro, Tampere, Simpele and Äänekoski mills.

The possible layoffs would last a maximum of 90 days and could be implemented in several instalments during 2024.

The change negotiations will start in week 45 and are estimated to last two weeks. With the change negotiations, Metsä Board is preparing for a possible continuation of the adjustment of production to match the low delivery volumes, if the demand situation for paperboards does not improve in 2024. The allocation and amount of layoffs will be specified during 2024.

Metsä Board has announced on similar layoffs on May 17, 2023, which may continue until the end of 2023. The possible layoffs announced now would be scheduled for 2024, and will therefore have no impact on Metsä Board’s operating result for January–September 2023 and January–December 2023.

خواندن ادامه مطلب

UPM to close its Plattling paper mill

UPM Communication Papers announces plans to permanently close its Plattling mill in Germany, reducing the uncoated and coated publication paper capacity by 595,000 tonnes in Europe. These plans are a continuation of necessary steps to proactively ensure competitiveness of our operations and align graphic paper capacity to a profitable customer demand.

Should the plans be implemented the number of UPM employees affected in Plattling is estimated at 401. In addition, we expect implications for the service providers on site. The participation process with the workers council will start immediately in line with local legislation.

 

خواندن ادامه مطلب

Metsä Fibre to start demolition of old pulp mill in Kemi, Finland

Metsä Fibre, part of Metsä Group, closed down the old pulp mill in Kemi with the start-up of the new Kemi bioproduct mill. The securitisation and preparation for dismantling of the old mill started immediately after the shutdown. The actual demolition will start in early 2024 and the project will run until 2025.

“In the first phase, the old mill will be made safe so that the dismantling process is not dangerous and the work goes as smoothly as possible,” says Erkka Tahvanainen, VP Production Development , Metsä Fibre, who is responsible for the dismantling project. “The demolition project will employ a few dozen people and will involve both our own people and external operators.” The machinery and equipment of the demolished factory will be recycled for reuse as different metals.

خواندن ادامه مطلب

4evergreen announces its first Circularity Success Stories initiative

The 4evergreen Alliance today unveils five selected projects from its first “Circularity Success Stories” initiative, which showcases members’ remarkable efforts to increase the recycling rate of fiber-based packaging to 90% by 2030.

Three years on from its inception, 4evergreen invited members to share groundbreaking projects, whether developed individually or collaboratively, that have been spurred by the alliance and can serve as inspiring examples of fiber-based packaging circularity and sustainability.

A total of 22 inspiring projects have qualified, and five will be showcased during 4evergreen’s annual conference, “The Pathway to Circularity: from Guidance to Action,” on 20 November in Brussels and online.

خواندن ادامه مطلب

Sofidel opens new automated warehouse in Poland

Sofidel has opened an automated warehouse at its plant in Ciechanów, Poland. The new 11,000 m2 warehouse can handle 32,000 pallets of goods and is designed to ensure higher efficiency and safety standards. The automated warehouse in Ciechanów, whose project was coordinated by Sofidel’s technical department, is the second one built in Europe, the first being in Sweden, and the third in the world, after the one in Circleville, Ohio, United States.

Efficiency in terms of space, logistics and customer service

Pallets of goods are stored in an area of 8,500 m2spread across eight floors. Six stacker trolleys operate here autonomously, and satellite shuttles transfer or pick up pallets of products in the storage cell assigned by the control system. This solution saves up to 40% of warehouse space.

 

خواندن ادامه مطلب

Essity Reuses More Than Half of France’s Recycled Food and Beverage Packaging

The hygiene and health company Essity has inaugurated the world’s first production line for professional hygiene tissue products where the raw material consists of used food and milk packaging. The facility recycles 25,000 tons per year, equivalent to 60% of all collected, sorted and recycled food and beverage cartons in France.

 The latest expansion at Essity’s Hondouville plant has increased the facility’s recycling capacity by 40%.

 

 

خواندن ادامه مطلب

Toscotec starts up a complete press section rebuild at Cartiera Pirinoli in Italy

Toscotec started up a packaging paper machine at Cartiera Pirinoli after the complete rebuild of the press section at their Roccavione facility in Italy.

Toscotec installed a first nip with double felted press roll and a second nip with a Voith NipcoFlex shoe press designed for a maximum load of 1,600 kN/m. The project also included a fully automatic tail feeding system, felt runs, showers, rolls, doctors, as well as guide and stretcher systems.

 

 

خواندن ادامه مطلب

VPK Group Buys Majority Stake in Corrugated Packaging Company Zetacarton in Italy

VPK Group has entered into an agreement to acquire a majority stake in Zetacarton, an Italian corrugated cardboard company based near Como. With this new step, VPK Group is setting foot in Italy for the first time.

Zetacarton, an Italian company led by the Zanfrini family, is a leading producer of corrugated board packaging including special niche products such as fanfold and big-box packaging.

خواندن ادامه مطلب

Kadant to supply green liquor system upgrade for Södra Cell

Kadant Noss AB, a subsidiary of Kadant Inc., has announced its agreement to deliver a Green Liquor System upgrade to the Södra Cell Mörrum Mill in Sweden. This order encompasses the provision of a green liquor clarifier, dregs precoat filter, engineering services, and on-site support.

Mörrum Mill is a specialized facility with two distinct production lines. One line manufactures a wide variety of premium paper pulps, while the other is dedicated to dissolving pulp for textile and other applications, featuring the innovative OnceMore® process.

 

خواندن ادامه مطلب

Smithers announces P&P 2023 conference agenda

In Amsterdam, across the 12-13 December 2023 the Plastics and Paper in Contact with Foodstuffs 2023 conference promises to be an exceptional gathering of the whole food contact supply chain, who look to address all topical concerns in the food contact industry and develop their knowledge on how to best comply with all the latest regulations.

Over 100 food contact professionals are expected to join us at the Marriott Hotel on the 12-13 December 2023. The 2023 agenda was carefully curated with insights from big industry players including Barilla, DS Smith, FEICA, ISEGA, Stora Enso, BASF, De’Longhi and many more.

A few of the recently confirmed speakers include Dr. Martin Klatt, Executive Specialist Regulatory Affairs, Head of Product Stewardship Dispersions & Resins at BASF, Dr. Ralph Derra, Managing Director at ISEGA GmbH, Peter Oldring, Regulatory Affairs Manager at Sherwin-Williams, Dr. Malcolm Driffield, Managing Scientist, Chemical Regulation & Food Safety at Exponent International, José Antonio Alarcon, Secretary of the Functional Barrier Consortium, CEO IGBS at Petcore Europe, Elisa Mayrhofer, Project Manager & Scientist at Austrian Research Institute for Chemistry & Technology, Marcello Pezzi, Product Safety Director at DS Smith.

 

خواندن ادامه مطلب

Enstra Paper commissions Voith for comprehensive rebuild of paper machine

Enstra Paper, member of the Corruseal Group and one of the largest producers of recycled containerboard grades in South Africa, has engaged Voith to rebuild its PM 6 for packaging paper in Springs, close to Johannesburg, in South Africa. Voith will supply a new BlueLine OCC stock preparation line to improve efficiency, runability and paper quality. The leading full-line supplier will also undertake substantial rebuild measures on the existing paper machine that was converted from newsprint to packaging papers in 2015.

“Enstra Paper’s new production line 6 will significantly improve our competitiveness, cost situation and product quality,” says Rajiv Mehta, Joint CEO at Corruseal Group. “The partnership with Voith is the next important investment step for the future of our company.”

 

خواندن ادامه مطلب

Andritz to supply a pressurized refining system to Sonae Arauco

Andritz will supply a pressurized refining system to Sonae Arauco Deutschland GmbH’s mill in Meppen, Germany, to produce wood-based insulation products. This will be the 15th insulation board production line equipped with an ANDRITZ pressurized refining system, confirming ANDRITZ’s strong position in the industry.

 

The new line will process a mixture of wood chips from different types of timber to produce insulation boards for the construction industries. Start-up is scheduled for 2025.

 

خواندن ادامه مطلب

Wind power gets a boost from Mondi and NKE

Mondi Grünburg has partnered with NKE, a prominent manufacturer of bearing solutions for wind, railway and industrial applications, to create a new packaging solution for wind power components. With the rising demand for renewable energy sources, the wind power sector has gained significant attention. The challenging operating conditions of wind turbines necessitate components that deliver exceptional efficiency and uncompromising reliability.

خواندن ادامه مطلب