۲ کیلو کاغذ مرکز تامین‌کنندگان صنایع سلولزی

آرشیو برچسب های: paper

Pioneering research into reducing water footprint paper industry in Eerbeek and Loenen

After more than a year of technical and practical preparations, the Eerbeek Water Roundabout (The Netherlands) pilot was officially launched in September. On the premises of Industriewater Eerbeek (IWE), a test installation of a closed, circular water management system will run until the end of 2023. This pilot will investigate whether a ‘full scale’ installation is technically and financially feasible. The aim is to connect the first paper mill to the circular system by mid-2026. The Water roundabout Eerbeek is committed to making the paper industry more sustainable and almost 100% circular reuse of industrial wastewater. This will ensure paper and cardboard mills around Eerbeek and Loenen continue to have sufficient water for their production processes in the future, while drastically reducing their water footprint.

The project was initiated and developed by Folding Boxboard Eerbeek together with the two other paper mills from Eerbeek that also own IWE; a fourth paper mill from nearby Loenen has committed to the test as a party. Together, the four paper mills have a highly water-intensive production process and, in making water consumption within Waterrotonde Eerbeek circular, could together save 3.6 million m3 of groundwater annually. This is equivalent to the consumption of 22,000 households. Moreover, the technology could be the answer to the impending shortage of clean drinking water due to climate change and population and economic growth.

 

خواندن ادامه مطلب

Valmet has completed the acquisition of Körber’s Business Area Tissue

Valmet has completed the acquisition of Körber’s Business Area Tissue, the provider of innovative process technologies and related services for converting tissue jumbo reels into final tissue products. The closing of the transaction follows the agreement that was announced on July 7, 2023.

By combining the complementary offering and competencies of Valmet and the acquired business, Valmet creates the markets’ widest technology, automation and services offering for the growing tissue industry covering the entire tissue value chain from fiber to finished products.

The new Tissue Converting business will operate as a business unit integrated in Valmet’s Paper business line. It focuses on delivering and serving converting lines for rolled and folded tissue products, packaging equipment and on providing digital solutions and services. The acquired business enables Valmet to serve the tissue industry with wider expertise, process technologies and services covering end-to-end solutions including automation systems and flow control equipment.Pasi Laine, President and CEO of Valmet:

 

خواندن ادامه مطلب

Gutex produces first fibers for insulation board with new Andritz fiber preparation system

Wood fiber insulation board manufacturer Gutex has successfully produced first fibers with its new ANDRITZ fiber preparation system in Eschbach, Germany. This is the second system ANDRITZ has delivered to GUTEX.

Oliver Bauch, Plant Manager, GUTEX, says: “The new line will perfectly support the environmentally friendly production approach for our ecological insulation board products. Thanks to the excellent cooperation and the great effort of the whole ANDRITZ team we were able to produce first fibers even ahead of schedule.”

Michael Rupp, Vice President for Panelboard Systems, ANDRITZ, adds: “We are proud that GUTEX again chose to collaborate with us and that we had the opportunity to provide them with our complete front-end technology.”

 

خواندن ادامه مطلب

Spain’s paper and paperboard imports decline slightly to $1.1M in July 2023

In July 2023, after two months of growth, there was significant decline in purchases abroad of paper and paperboard (creped, crinkled, embossed or perforated), when their volume decreased by -15.6% to 380 tons. In general, total imports indicated a pronounced increase from July 2022 to July 2023: its volume increased at an average monthly rate of +2.5% over the last twelve months. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period.

Based on July 2023 figures, imports increased by +35.8% against April 2023 indices. The most prominent rate of growth was recorded in January 2023 with an increase of 142% month-to-month. In value terms, paper and paperboard imports contracted to $1.1M (IndexBox estimates) in July 2023. Over the period under review, total imports indicated tangible growth from July 2022 to July 2023: its value increased at an average monthly rate of +2.4% over the last twelve months. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on July 2023 figures, imports increased by +21.8% against April 2023 indices. The pace of growth appeared the most rapid in August 2022 when imports increased by 79% m-o-m. As a result, imports attained the peak of $1.5M. From September 2022 to July 2023, the growth of imports failed to regain momentum.

 

خواندن ادامه مطلب

AF&PA Releases Q3 2023 containerboard quarterly report

The American Forest & Paper Association (AF&PA) released its Q3 2023 Containerboard Quarterly report. According to the report, total Containerboard production in the third quarter of 2023 decreased 1% when compared to Q3 2022 and was down 8% compared to the same 9 months last year. Highlights include:

  • Operating rates for all major grades decreased compared to Q2 2023 while total production was up 4.2%; Q3 has one more production day than Q2.
  • Total production for export was up 16.2% from Q2 2023 and also up 16.3% from Q3 2022, though it was 10.7% lower year-to-date.
  • New supply of containerboard (domestic production plus imports) increased for the third consecutive quarter but was still down 7.1% year-to-date.
  • Mill inventories ended the quarter at 370,500 short tons, 11.6% lower than at the end of Q3 2022.
خواندن ادامه مطلب

De Iuliis successfully started dryer section revamping for Favini Group

Favini Group successfully started up its PM of  Rossano Veneto after the complete rebuilt of its pre-dryer section by De Iuliis.

DJM has completed the full upgrade of the pre-drying section of this paper machine by the substitution of  ۱۲ cast iron dryers with new DJM steel Dryers designed for an operating steam pressure of 10 barg.

The custom sized DJM steel dryers, complete with new bearings housing, with  an easy replacement of the old cylinders maintaining the same overall dimensions of the existing one, but allowing an enlargement of the drying width. The new dryers will help the mill to reduce Co2 emission and energy consumption.

The project also included the optimization of felts loops with the supply of last generation DJM automatic stretchers and regulators, as the upgrade of the mechanical drive of dryer section.

Favini is worldwide leader in the design and production of textures and finishing solutions for eco-leather for fashion, luxury, design, IT and technical sportswear sectors.

خواندن ادامه مطلب

Toscotec to supply drying section upgrade to Panda Paper Mills in Israel

Panda Paper Mills (1997), a subsidiary of Israeli leading manufacturer Sano Enterprises, has selected Toscotec for the supply of a complete drying section rebuild of PM1 at their Netanya production facility in Israel. PM1 produces high quality tissue from recycled fibres for the Away from Home market. The upgrade aims to substantially increase the machine’s drying capacity and is planned for the second half of 2024.

Toscotec will supply a TT SYD Steel Yankee Dryer of latest generation, the entire steam and condensate removal system and high-efficiency TT Hoods. The service package includes the engineering, erection supervision, training, commissioning and start-up assistance. The new dryer section is set to slash PM1’s energy consumptions and increase production efficiency.

 

خواندن ادامه مطلب

Suzano to Invest R$1.66 billion in new tissue paper mill

Suzano, the world’s largest producer of market pulp, announces on October 26th a series of projects aimed at expanding its installed production capacity and which will enhance its operational efficiency. It will invest R$650 million in the construction of a tissue paper mill in Espírito Santo, where it will also invest R$520 million to replace a biomass boiler. The company will also invest R$490 million to expand the supply of fluff pulp in São Paulo.

The total investment of R$1.66 billion, announced during the disclosure of the 3Q23 results, is aligned with Suzano’s strategic business avenues and underscores its commitment to constantly adapt its operations to evolving demand in Brazil and the global markets.

 

خواندن ادامه مطلب

Essity reuses more than half of France’s recycled food and beverage packaging

The hygiene and health company Essity has inaugurated the world’s first production line for professional hygiene tissue products where the raw material consists of used food and milk packaging. The facility recycles 25,000 tons per year, equivalent to 60% of all collected, sorted and recycled food and beverage cartons in France.

Since 2008, Essity’s plant in Hondouville has been the leader in recycling paper fiber from food and beverage packaging in France. The latest expansion has increased the recycling capacity by 40%. In addition to increased recycling capacity, the process also enables the recycling of almost all the materials in the packaging, including plastic and aluminum. Essity uses the fiber raw material to manufacture tissue products under the Tork brand.

Essity is constantly developing new methods to reuse materials and optimize resources, with the aim of achieving net zero emissions by 2050. The company has similar recycling initiatives in Germany, the Netherlands and most recently in Ecuador, where Essity is collaborating with McDonald’s and the company ReciVeci to recycle paper cups from fast-food restaurants.

“A truly circular society can only be achieved if there is integrated collaboration between all members of the value chain, and our production plant in Hondouville is a role model in end to-end circular economy. The production facility provides cost-efficient and sustainable production while we take important steps toward a world with zero landfill,” says Donato Giorgio, President, Global Supply Chain at Essity.

France is Essity’s second largest market in Europe with approximately 2,300 employees and annual sales of SEK 11.7bn. Essity manufactures and sells hygiene and health products under leading brands, such as Actimove, Cutimed, Delta-Cast, Demak’Up, JOBST, Leukoplast, Lotus, Nana, Okay, TENA and Tork.

خواندن ادامه مطلب

Metsä Board commences change negotiations on possible temporary layoffs in Finland

Metsa Board, part of Metsa Group, will initiate change negotiations on possible temporary layoffs for its paperboard and BCTMP mills in Finland. The negotiations involve a total of approximately 1,100 employees at the Joutseno, Kaskinen, Kemi, Kyro, Tampere, Simpele and Äänekoski mills.

The possible layoffs would last a maximum of 90 days and could be implemented in several instalments during 2024.

The change negotiations will start in week 45 and are estimated to last two weeks. With the change negotiations, Metsä Board is preparing for a possible continuation of the adjustment of production to match the low delivery volumes, if the demand situation for paperboards does not improve in 2024. The allocation and amount of layoffs will be specified during 2024.

Metsä Board has announced on similar layoffs on May 17, 2023, which may continue until the end of 2023. The possible layoffs announced now would be scheduled for 2024, and will therefore have no impact on Metsä Board’s operating result for January–September 2023 and January–December 2023.

خواندن ادامه مطلب

Massimo Reynaudo appointed new President and CEO of UPM-Kymmene

Massimo Reynaudo has been appointed President and CEO of UPM-Kymmene Corporation as of 1 January 2024. Jussi Pesonen will continue as the President and CEO until 31 December 2023, after which he will work as an advisor to the Company and its management until he will retire from UPM on 30 April, 2024.

Massimo Reynaudo has been with UPM since 2017. Reynaudo is an Italian citizen and was born in 1969. He is currently Executive Vice President, UPM Communication Papers. Prior to that, he served as Senior Vice President of UPM Raflatac from 2017 to 2021. Earlier in his career, between 1995 and 2017, he held several senior positions at Kimberly-Clark Corporation. He has a master’s degree in engineering from Politecnico di Torino and additional studies in business administration and management.

“Massimo has an excellent international background and a very solid track record at UPM as an engaging change leader. Both in UPM Raflatac and in UPM Communication Papers, he has driven positive change of the businesses, renewed the commercial strategy and built high-performing teams to improve the performance of each business. He has a clear vision of how to continue value creation through UPM’s Biofore strategy. I wish Massimo the best of success in his new demanding role,“ says Henrik Ehrnrooth, Chair of the Board of UPM.

 

خواندن ادامه مطلب

One Equity Partners to sell Walki to Japan’s Oji Group

One Equity Partners announced that it has entered into a definitive agreement to sell Walki Holding Oy, a pan-European supplier of sustainable and high-performing packaging and engineered materials solutions, to Oji Holdings Corporation, a Japanese paper products technology company.

 

Founded in 1930 and headquartered in Espoo, Finland, Walki is a specialty packaging materials manufacturer, offering consumer and industrial packaging for food and specialty consumer products, as well as engineered materials, such as insulation and fire-retardant facings, sustainable membranes, and protective clothing applications. The Company has 17 production facilities worldwide and employs more than 1,700 people. OEP’s acquisition of Walki closed in July 2018.

 

 

خواندن ادامه مطلب

Carton Group to take over British luxury packaging supplier Wrapology

German Carton Group will take over British luxury packaging supplier Wrapology.

The family-led business will become a direct subsidiary of Carton Group. Financial details of the transaction have not been disclosed.

Wrapology is a pioneer in customized, sustainable and outstanding luxury packaging. Known for its keen sense for brands, the company is characterized by exceptional packaging design and the use of high-quality material. Wrapology has a distinctive customer portfolio including high-profile, international and emerging brands.

Wrapology is based in London and has subsidiaries in Hong Kong and Shenzhen.

خواندن ادامه مطلب

Paper Excellence Canada extends curtailment of paper operations at Catalyst Crofton mill

While market conditions continue to support the restart of our pulp operations and employment of more than 300 workers, the curtailment of paper operations at Crofton is being extended to the end of November.

The continued curtailment means that approximately 70 paper operations employees will not return to work in November. Paper Excellence Canada continues to work with our employees to mitigate the impact of the ongoing paper production curtailment.

The sales team continues to work with customers to provide alternative products from Catalyst Alberni mill or other mills within the Paper Excellence Group family of companies where possible.

Paper Excellence Canada, headquartered in British Columbia, is a diversified manufacturer of pulp and specialty, printing, writing, and packaging papers in Canada with a production capacity of over 2.5 million tonnes annually and a workforce of more than 2,100. Paper Excellence is pleased to work in partnership with communities where we operate as a major employer of choice and market leader.

خواندن ادامه مطلب

Metsä Fibre to start demolition of old pulp mill in Kemi, Finland

Metsä Fibre, part of Metsä Group, closed down the old pulp mill in Kemi with the start-up of the new Kemi bioproduct mill. The securitisation and preparation for dismantling of the old mill started immediately after the shutdown. The actual demolition will start in early 2024 and the project will run until 2025.

“In the first phase, the old mill will be made safe so that the dismantling process is not dangerous and the work goes as smoothly as possible,” says Erkka Tahvanainen, VP Production Development , Metsä Fibre, who is responsible for the dismantling project. “The demolition project will employ a few dozen people and will involve both our own people and external operators.” The machinery and equipment of the demolished factory will be recycled for reuse as different metals.

خواندن ادامه مطلب

4evergreen announces its first Circularity Success Stories initiative

The 4evergreen Alliance today unveils five selected projects from its first “Circularity Success Stories” initiative, which showcases members’ remarkable efforts to increase the recycling rate of fiber-based packaging to 90% by 2030.

Three years on from its inception, 4evergreen invited members to share groundbreaking projects, whether developed individually or collaboratively, that have been spurred by the alliance and can serve as inspiring examples of fiber-based packaging circularity and sustainability.

A total of 22 inspiring projects have qualified, and five will be showcased during 4evergreen’s annual conference, “The Pathway to Circularity: from Guidance to Action,” on 20 November in Brussels and online.

خواندن ادامه مطلب

Ahlstrom promotes plastic-free packaging by offering paper tape solutions

Ahlstrom is extending its product range of pressure-sensitive adhesive packaging tape applications. MasterTape® Pack supplements the fiber-based product offering supporting megatrends like e-commerce and the global need for more sustainable packaging solutions.

There are approximately 30 billion square meters of packaging tape worldwide, and the numbers are growing with the expansion of e-commerce. The market is currently dominated by plastic tape, constituting 80% of all packaging tape. However, there exists a more sustainable alternative in the form of paper tape, which paves the way for a plastic-free future for packaging. Ahlstrom is a key player in the packaging tape industry and has excellent know-how in fiber-based solutions.

خواندن ادامه مطلب

Sofidel opens new automated warehouse in Poland

Sofidel has opened an automated warehouse at its plant in Ciechanów, Poland. The new 11,000 m2 warehouse can handle 32,000 pallets of goods and is designed to ensure higher efficiency and safety standards. The automated warehouse in Ciechanów, whose project was coordinated by Sofidel’s technical department, is the second one built in Europe, the first being in Sweden, and the third in the world, after the one in Circleville, Ohio, United States.

Efficiency in terms of space, logistics and customer service

Pallets of goods are stored in an area of 8,500 m2spread across eight floors. Six stacker trolleys operate here autonomously, and satellite shuttles transfer or pick up pallets of products in the storage cell assigned by the control system. This solution saves up to 40% of warehouse space.

 

خواندن ادامه مطلب

International Paper to permanently close its Orange mill

International Paper announced a series of actions to further strengthen and optimize its manufacturing system to meet customers’ needs. The company will permanently close its containerboard mill in Orange, Texas, and will permanently cease production on two of its pulp machines – the #20 machine in Riegelwood, N.C., and the #4 machine in Pensacola, Fla.

“Decisions like these are extremely difficult, because of the impact on our employees, their families and the communities in which we operate,” said Chairman and CEO Mark Sutton. “We are grateful to our employees in Orange, Riegelwood and Pensacola for their significant contributions to the company over the years. We are committed to providing severance benefits, outplacement assistance and more to help employees during this time.”

 

خواندن ادامه مطلب

Sofidel ranks best in industry for ESG risk management

Sofidel, a global household products company ranked first over 103 companies in its industry by Morningstar Sustainalytics for its commitment to the preservation of biodiversity, anti-corruption strategies and transparency.

Sofidel placed in the “Low Risk” category which lists companies with an ability to manage environmental, social and governance risks. Sustainalytics ranked Sofidel in the top 10% of over 15,000 global companies evaluated.

 

خواندن ادامه مطلب