۲ کیلو کاغذ مرکز تامین‌کنندگان صنایع سلولزی

آرشیو برچسب های: paper machinery

Toscotec to supply a turnkey tissue line to Softys subsidiary in Mexico

Softys has selected Toscotec for the supply of a complete tissue line at their facility in Altamira, Mexico. Scheduled for start-up in the first quarter of 2025, the new AHEAD 2.2 line (PM5) will be supplied on a turnkey basis

Superior Drying Efficiency 
The AHEAD 2.2 machine guarantees the highest available drying efficiency through the combination of TT NextPress shoe press, TT SYD Steel Yankee Dryer, and high efficiency TT HoodsThe shoe press is equipped with TT TurboDryer, which uses heat recovered from the air system to reduce water viscosity and enhance the shoe press’s de-watering action to significantly increase post-press dryness. The Yankee hoods also feature TT Swing, an innovative solution that delivers maximum flexibility and energy saving in regulating the air system operation mode. Based on the production needs, TT Swing can be easily adjusted to run as a parallel system (two separate circuits of heated air, one to the wet end hood and the other to the dry end), a cascade system (air from dry end hood flows into wet end hood before recirculating), or a hybrid system configuration (heated air to the wet end hood and only extraction from the dry end) in order to guarantee optimal energy efficiency in the drying section of the tissue machine.

 

خواندن ادامه مطلب

Wind power gets a boost from Mondi and NKE

Mondi Grünburg has partnered with NKE, a prominent manufacturer of bearing solutions for wind, railway and industrial applications, to create a new packaging solution for wind power components. With the rising demand for renewable energy sources, the wind power sector has gained significant attention. The challenging operating conditions of wind turbines necessitate components that deliver exceptional efficiency and uncompromising reliability.

خواندن ادامه مطلب

Haleon joins PulPac’s and PA Consulting’s Blister Pack Collective as a founding member

PA Consulting (PA), the company bringing ingenuity to life, and PulPac, the Swedish R&D and IP company behind Dry Molded Fiber, announce that global consumer health company Haleon has joined its Blister Pack Collective as a founding member.

PA and PulPac created the Blister Pack Collective to limit the use of non-recyclable plastics in over-the-counter and prescription drug packaging through cross-industry collaboration. It brings together pharma, consumer health, and FMCG businesses to accelerate progress towards a world of more sustainable tablet packs, free from problem plastics like polyvinyl chloride (PVC).

خواندن ادامه مطلب

Sappi concludes consultation process at Stockstadt mill

The persistent global economic downturn is proving to be much tougher than anticipated with depressed markets, geopolitical instability and weak economic growth combining to put significant pressure on Sappi, particularly in Europe.

“In response we announced on 6 July 2023 the start of a consultation process on the possible closure of Stockstadt Mill. We have completed this process and agreed on the social plan for the employees. In addition, an agreement has been signed for the sale of the site. The closure of the site should be completed during the first calendar quarter of 2024. Once all closure elements are taken into account, the impact is expected to be cash neutral”, Sappi writes.

 

Sappi continues to be faced with significant overcapacity in graphic paper forcing us to take extended periods of costly commercial downtime. As the recent over-stocking by customers reduces it has become very clear that demand will not return to previous levels. Combined with input cost pressure, we do not see this situation, caused by factors beyond our control improving in the foreseeable future.

 

خواندن ادامه مطلب

RYAM to temporarily idle production at its paperboard and high-yield pulp operations

Rayonier Advanced Materials (NYSE: RYAM) is announcing that in order to optimize inventory levels and address lower-than-anticipated demand, its Témiscaming Paperboard operation and one of its High-Yield Pulp lines will be idled for 3 weeks, beginning on October 7.

Customer orders will not be affected, the company said.

The Témiscaming mill, which is located in Quebec, Canada, produces high-purity cellulose, high-yield pulp, and coated paperboard. Its operations are powered by carbon-neutral hydroelectricity, and a renewable biomass power generation system on-site, which produces renewable energy for the Hydro Quebec grid.

The mill employs around 700 people.

RYAM is a global leader of cellulose-based technologies, including high purity cellulose specialties, a natural polymer commonly found in filters, food, pharmaceuticals, and other industrial applications. The Company also manufactures products for paper and packaging markets.

SOURCE: Rayonier Advanced Materials Inc. (RYAM)

خواندن ادامه مطلب

Andritz plant to prepare date palm waste for fiberboard production

Andritz will supply a complete fiber preparation line for a greenfield plant in the Toshka area in the south of Egypt. The pioneering and eco-friendly plant will produce high-density and medium-density fiberboard (HDF/MDF) from date palm fronds, a material normally considered farm waste.

 

Andritz will execute this order in cooperation with the engineering, procurement and construction (EPC) specialist WESER Industrie- und Anlagentechnik GmbH and DIEFFENBACHER GmbH Maschinen- und Anlagenbau, a leading manufacturer of press systems and complete plants for the wood-based panel industry. On behalf of Egypt’s National Service Projects Organization (NSPO), the German company WESER is acting as the general contractor for this turnkey project.

 

 

خواندن ادامه مطلب

Pactiv Evergreen and ExxonMobil Collaborate to Leverage Advanced Recycling for Foodservice Industry Packaging

Pactiv Evergreen and ExxonMobil are teaming up to provide certified-circular packaging solutions to major food brands and foodservice providers.

Pactiv Evergreen will soon offer its customers certified-circular polypropylene (PP) packaging products leveraging ExxonMobil’s Exxtend™ technology for advanced recycling. These innovative products will meet all regulatory requirements and specifications for food contact applications.

“Pactiv Evergreen produces more than 14,000 products in 14 different materials that protect, package and display fresh food and beverages,” said Tim Levenda, President of Pactiv Evergreen’s Foodservice business unit. “Our broad material expertise allows us to support our customers quickly and effectively, and our collaboration with ExxonMobil enables us to offer additional innovative packaging options to our customers with an expanded portfolio of circular packaging.”

 

خواندن ادامه مطلب

Fourstones prepares for Q2 2024 launch of new paper machine

Fourstones Paper Mill announces the installation of a new paper machine at their Sapphire Paper Mill site in Leslie, Scotland.

The paper machine, which was delivered to site in September, is equipped with a Crescent Former, a Fabricated Steel Yankee Cylinder and a High Temperature Drying Hood has a trimmed width of 2.75m and an operating speed of 1700m/min.

The civil and infrastructure works have now been completed, and the paper machine installation is set to begin October 2023, with commissioning scheduled for Q2 2024.

The company anticipates that the new machine will increase paper production capacity on the site to 60,000 tonnes annually. The machine will primarily produce virgin toilet tissue and towel grades for the consumer and away from home markets.

 

خواندن ادامه مطلب

Graphic Packaging to permanently decommission CRB machine at its Kalamazoo mill

Graphic Packaging Holding Company, a leading consumer packaging company, announced it will permanently decommission the K3 coated recycled paperboard (CRB) machine in Kalamazoo, Michigan. The K3 machine is one of three CRB machines at the Kalamazoo facility and is the company’s longest-running machine. K3 ceased operation on July 1 and today’s announcement reflects the decision to permanently shut down the 125,000-tons per annum machine.

Removing higher-cost, less efficient production capacity is part of Graphic Packaging’s CRB optimization plan first announced in 2019 alongside the transformational investment in a new, state-of-the-art K2 CRB machine. Permanently decommissioning the older machine is the company’s next step of network optimization. With K2 reaching expected quality, cost improvement and volume commitments ahead of schedule, the permanent decommissioning of K3 supports more efficient resource use and margin enhancement goals for the CRB network, while continuing to service increased customer demand for high quality coated recycled paperboard.

The machine decommission is not expected to have any impact on the company’s 2023 projected Adjusted EBITDA of $1.9 billion, the midpoint of the previously provided guidance range.

خواندن ادامه مطلب

Solvay launches new PVDC coating solution for more sustainable pharmaceutical blister films

Solvay, a global market leader in specialty materials, has introduced Diofan® Ultra736, a new polyvinylidene chloride (PVDC) coating solution with ultra-high water vapor barrier that allows carbon footprint reduction for pharmaceutical blister films. As an aqueous dispersion, Diofan® Ultra736 is fluorine-free, meets regulatory requirements for direct pharmaceutical contact and supports the design of sustainable films with thinner coating designs.

خواندن ادامه مطلب

Ahlstrom completes the divestment of Stenay plant to Accursia Capital

Ahlstrom has completed the divestment of its Stenay plant in France to Accursia Capital. The planned transaction was announced on 25 August 2023.

Accursia Capital now operates the Stenay plant under a new brand, Stenpa. Accursia Capital’s aim is to develop the plant further to ensure its long-term future in the competitive paper-based packaging market, securing the jobs of its employees and positively impacting the broader community of Stenay.

خواندن ادامه مطلب

Toscotec to supply a complete hood system rebuild to Lucart

Lucart has selected Toscotec for the complete rebuild of PM14’s Yankee hoods and air system at their Aranguren tissue mill in Spain. The project is scheduled for the first quarter of 2024.

خواندن ادامه مطلب

PulPac signs a strategic sales partner deal for Japan with Correns Corporation

Swedish packaging tech company PulPac is ready to launch Dry Molded Fiber on the Japanese market. Recently, PulPac signed a deal with Correns Corporation, making the Japanese based company with German roots their dedicated sales partner in the Japanese market.

Dry Molded Fiber is a game-changing fiber-forming technology invented and licensed by PulPac to replace single-use plastic on a global scale. The technology makes it possible to produce sustainable packaging that’s resource-, energy-, and cost-efficient.

خواندن ادامه مطلب

Smurfit Kappa inaugurates pioneering industrial water treatment plant in Serbia

Smurfit Kappa has inaugurated a pioneering purification and wastewater treatment plant in Belgrade, Serbia, the first of its kind in the country. The state-of-the-art plant is located on the site of Smurfit Kappa’s Belgrade paper mill, which was acquired in 2019.

The Group’s €۵ million investment in the plant enables it to purify water to the highest standards before it can be returned to the environment. Purified water can also be partially reused in the process, further reducing water consumption by up to 90%. This innovative treatment also reduces electricity usage and CO2 emissions by up to 80%.

 

خواندن ادامه مطلب

West Fraser to sell two pulp mills in Western Canada to Atlas Holdings

West Fraser Timber and Atlas Holdings recently announced the signing of a definitive agreement for the sale of West Fraser’s Quesnel River Pulp mill in Quesnel, British Columbia and its Slave Lake Pulp mill in Slave Lake, Alberta to Atlas. Atlas owns and operates several pulp, paper and wood products businesses in Canada and the United States.

خواندن ادامه مطلب

UK food market first as Mondi launches new recyclable paper-based packaging with Veetee

Mondi, a global leader in sustainable packaging and paper, is bringing paper-packed dry rice to the UK for the first time, by collaborating with award-winning rice supplier Veetee.

Veetee’s new rice packaging has been created using Mondi’s FunctionalBarrier Paper, providing a safe, secure and strong alternative to the industry standard plastic packs. Veetee and Mondi are the first in the UK to launch a paper-based alternative for dry rice, customised in direct response to consumer demands for more sustainable packaging.

خواندن ادامه مطلب

Metsä Tissue chooses Goole, East Riding of Yorkshire for planned landmark UK investment

Metsä Tissue announces that it has chosen Goole, East Riding of Yorkshire as the site for its planned new state-of-the-art tissue paper mill in the UK. This landmark investment of several hundreds of millions of pounds will deliver the largest tissue mill in the UK and significantly reduce the quantity of tissue products that are currently imported into the UK and Ireland each year. The new mill will create 400+ jobs at the facility, as well as thousands more across the supply chain and the local economy.

خواندن ادامه مطلب

Kipas Kagit orders order two forming fabric cleaners from ProJet

ProJet received an order for 2 Forming Fabric Cleaners (ProCleanersTM) from Kipas Kagit Paper for their Paper Machine # 1 in Turkey. The order was received in September 2023 and the value of the order will not be disclosed. Delivery will be in Q2 of 2024.

PM1 produces Fluting and Testliner on a 8.6 meter wide machine, using 100% OCC. OCC is known for its extreme contamination on the Paper Machine Clothing. The ProCleanerTM with the “ProPlusModeTM” is highly effective in maintaining cleanliness and permeability of Forming Fabrics which is exactly the reason that Kipas Kagit continues to choose for ProJet. The “۲.۰” head is equipped with more nozzles for continuous cleaning and enhanced cleaning during sheet breaks, the “ProPlusModeTM”. Cleaning water and contamination is effectively evacuated by a vacuum system.

 

خواندن ادامه مطلب

PulPac launches the world’s first injection molding machine for fiber-based products

PulPac makes good on its promise to make Dry Molded Fiber more accessible to people worldwide. With the launch of a new machine platform, the PulPac Scala, the company takes a significant step in the Dry Molded Fiber revolution. The Scala platform is based on injection molding, a technology associated with plastic conversion, combined with PulPac’s new and unique Mill-to-Web fiber unit. The first Scala machines are sold by launch partner Huarong Group and equipped for producing fiber-based lids.

Dry Molded Fiber is a game-changing fiber-forming technology invented and licensed by Swedish packaging tech company PulPac to replace single-use plastic on a global scale. The technology makes it possible to produce sustainable packaging that’s resource-, energy-, and cost-efficient. Together with turnkey partner Huarong Group from Taiwan, PulPac is now launching a compact and scalable Dry Molded Fiber machine platform.

 

خواندن ادامه مطلب

Sappi’s Kirkniemi paper mill switches to bioenergy

Sappi Europe’s Kirkniemi Mill in Lohja, Finland, has successfully made the switch from using fossil fuels to renewable energy to fuel the production of the Galerie paper range. A €۱۶.۵ million investment into state-of-the-art facilities and machinery for the reception, storage and handling of biofuels is the latest in a string of efforts by Sappi in meeting its Science-Based Targets Initiative (SBTi)-approved emissions reduction goal across all its regions.

The official inauguration of the new facilities for reception, storage and handling of biofuels on August 30, 2023, was attended by Kai Mykkänen, the Finnish Minister for Climate and the Environment, who spoke about how the multiple environmental investments by Sappi at Kirkniemi fit with Finland’s ambitious goals for carbon neutrality and leadership in the new energy sector.

 

خواندن ادامه مطلب