۲ کیلو کاغذ مرکز تامین‌کنندگان صنایع سلولزی

آرشیو برچسب های: paper machinery

Andritz to supply high-temperature Yankee hood and air system to Kartogroup, Spain

Andritz has received an order from Kartogroup España S.L. to supply a new high-temperature PrimeDry Hood HT and an air system for a tissue machine rebuild at the mill in Burriana, Spain.

Start-up is scheduled for the first quarter of 2024.

The new gas-heated hood will enable Kartogroup to achieve a higher drying capacity with a hood design impingement temperature of 530°C, a higher heat transfer rate and a significant reduction of energy consumption per ton of paper produced.

The special set of advanced solutions for the drying section rebuild include optimized impingement distribution of the hood nozzle boxes, a heat recovery system, a state-of-the-art burner management system and Yankee head insulation. Representing ANDRITZ’s latest developments in tissue drying technology, these solutions maximize the heat transfer rate, ensure higher safety, lower emissions and significantly reduce steam consumption.

 

خواندن ادامه مطلب

Afry to support Nordic Paper’s strategic investments for sustainable kraft paper production

Nordic Paper, a leading specialty paper producer with its base in Scandinavia, has selected AFRY as its engineering and project management partner for the strategic investment projects at its Bäckhammar mill in Sweden. The projects include a new wood room and a new electrostatic filter.

Nordic Paper has decided to invest approximately MSEK 850 to enhance the sustainability performance and competitiveness of the Bäckhammar mill, which produces kraft paper for various applications. An important component of the investment is a new wood room providing for both strategic flexibility in raw material sourcing and efficiency gains in the production. The emissions of dust to air will be reduced by more than two thirds through the installation of a new electrostatic filter.

خواندن ادامه مطلب

Metsä Group and Sweco have signed an agreement for the design of Kerto LVL mill

Metsä Group and Sweco, a specialist in the built environment and industry, have signed an agreement for the implementation planning of the new Kerto LVL mill in Äänekoski, Finland.

“We have strong confidence in Sweco’s expertise and resources from our previous collaboration projects. It is therefore natural that we continue our cooperation in this project to develop the Äänekoski mill area,” says Jaakko Anttila, Executive Vice President at Metsä Wood.

Sweco is responsible for the complete implementation planning of the mill project, including structural, process and plant design. Sweco was also responsible for the design of Metsä Group’s Äänekoski bioproduct mill, which started operations in 2017, and the planned wood product mill will apply the synergy benefits offered by the mill area.

 

خواندن ادامه مطلب

Runtech rebuilds vacuum system at Enstra Paper, South Africa

Runtech Systems rebuilds vacuum system and improves dewatering at Enstra Paper (Pty) Ltd PM6, South Africa. The delivery includes two low vacuum blowers, three EP600 Turbo Blowers with EcoDrop and EcoSep water separators and an EcoFlow dewatering measurement system for couch save-all and full press section. The new RunEco system replaces 16 liquid ring pumps, which significantly reduces both energy and water consumption. Delivery also includes new double doctor for 1st press bottom roll and suction roll save-all with integrated double doctoring.

“We selected Runtech because their vacuum system is compact, simple and flexible. Runtech understands full paper making process so they were capable of offering a total solution that includes doctors and dewatering measurements in addition to turbo blowers. Measuring water flow accurately is essential for optimizing vacuum levels,” says Nic Campher, Head of Paper, Enstra Paper.

Combining dewatering improvement and EcoFlow system with vacuum system rebuild often brings very significant benefit. We have seen up to 1.5% increase in dryness after press and 20-30 m/min increase in machine speed. Optimized vacuum level will reduce vacuum system power consumption even further as well as press section drive loads,” says Jussi Lahtinen, Sales Director, Runtech Systems.

 

خواندن ادامه مطلب

Pulp mill waste could find new use as fertilizer

Adding “biosolids” along with conventional fertilizer may reduce greenhouse gas emissions while improving soil, according to a new study from University of Alberta.

Pulp mill waste destined for the landfill could instead be useful as an organic fertilizer to help reduce the environmental impact of using conventional fertilizers while improving soil and tree growth, University of Alberta research shows.

A two-year study conducted on a hybrid poplar tree plantation in northern Alberta showed that compared with using conventional fertilizers alone, adding biosolids — wood and other fibres left over from pulp and paper production — reduced harmful greenhouse gas emissions from the soil.

 

خواندن ادامه مطلب

Velvet Care acquired by Partners Group

Partners Group, a leading global private markets firm, acting on behalf of its clients, has agreed to acquire Velvet CARE, Central Europe’s fastest-growing consumer tissue producer, from Abris Capital Partners and plans to build value through initiatives including expansion in Central Europe and beyond.

Velvet CARE is one of the largest manufacturers of hygiene tissue products in Central Europe, with more than 850 employees in Poland and Czechia.

Since 1996, Partners Group has invested USD 200 billion in private equity, private real estate, private debt and private infrastructure on behalf of its clients globally. The firm employs more than 1,800 diverse professionals across 20 offices worldwide and has regional headquarters in Baar-Zug, Switzerland; Denver, USA; and Singapore. It has been listed on the SIX Swiss Exchange since 2006.

Velvet CARE divestment by Abris Capital Partners takes place after five years of dynamic growth. Factors driving the growth include investment in production technology, infrastructure and automation, which allowed a significant increase in the scale of production, making Velvet CARE the industry leader in sustainable growth.

 

خواندن ادامه مطلب

Valmet has been included in the DJSI World and Europe indices for the tenth consecutive year

Valmet has been included in the Dow Jones Sustainability Index (DJSI) for the tenth consecutive year. The company was listed both in the Dow Jones Sustainability World and Europe indices.

The Dow Jones Sustainability Index evaluates companies’ ESG (Environmental, Social, Governance) performance and the capability to continuously improve. Valmet scored high especially in innovation management as well as resource efficiency, circularity, emissions and water reporting.

“We have consistently worked on all fronts of our Sustainability360º Agenda, which has been the backbone for the company’s sustainability work for the past decade. Since 2021, we have put even more emphasis on climate actions as we launched our climate program – Forward to a carbon neutral future – with ambitious emission reduction targets across our entire value chain by 2030. Already today, we have achieved one of the program’s targets meaning that we can enable fully carbon neutral production for all our pulp and paper industry customers. This milestone again clearly shows our employees’ commitment to continuous innovation and improvement. I want to thank all Valmeteers for their persistent work in making our operations more sustainable and for moving the entire industry forward,” says Anu Salonsaari-Posti, SVP, Marketing, communications, sustainability and corporate relations at Valmet.

About the Dow Jones Sustainability Indices

The DJSI is a sustainability index family, which includes the global sustainability leaders across industries. The company inclusion is based on a best-in-class approach, which means that the indices only include the top-ranked companies within each industry. The index serves as a benchmark for investors, who are committed to ethical investing and review companies’ ESG performance as part of their analyses.

خواندن ادامه مطلب

Valmet invests in roll cover production in the Columbus service center in the United States

Valmet is investing in state-of-the-art process equipment at its roll service center in Columbus, Mississippi, United States to broaden the scope of process covers being manufactured.

The value of the new investment will not be disclosed. Main equipment installations and commissioning took place during the third quarter 2023 and the new process is currently fully operational.

“This strategic investment shows our commitment to enhance our rubber, composite and polyurethane manufacturing capabilities and strengthens Valmet’s position as an industry leader for roll covers. It also responds to the growing demand for roll services that we have seen with the investments our customers continue to make in North America. Being close to our customers is one of our core commitments,” says Jonathan Demers, Director, Roll Services, North America, Valmet.

 

خواندن ادامه مطلب

Valmet to supply automation and quality control systems to Union Paper Mills in Dubai

Valmet will supply Valmet DNA Distributed Control System (DCS) and Valmet IQ Quality Control System (QCS) with the latest web-based Valmet DNA User Interface to Union Paper Mills’ paper machine PM 2 in its Dubai facility, in the United Arab Emirates.

Union Paper Mills selected Valmet’s automation systems based on a successful previous project conducted in 2017 for the automation of paper machine PM 3 in its Al Dhafra facility in Abu Dhabi. The new systems will replace the existing DCS and QCS from another supplier and enable the mill to improve the operating efficiency and optimize the end-product quality with the latest automation technology.

The order was included in Valmet’s orders received of the third quarter 2023. The delivery and start-up will take place in 2024. The value of the order is not disclosed.

 

خواندن ادامه مطلب

Metsä Group invests in startup FineCell

Metsä Group has made its second Swedish investment in FineCell (FineCellOx AB), developer of the FineCell technology and producer of CellOx dry cellulose powder. The company will use the EUR 1 million seed funding to improve its material application know-how, engage with potential customers, and finalise the material needed for making an investment decision concerning a demo production facility. The funding round lead by Metsä Group’s innovation company Metsä Spring consists of a group of investors, including EIT InnoEnergy and the company’s founder.

The FineCell technology can turn pulp into added-value biomaterial that can be used both as a powder and as a water solution, i.e., a hydrogel. These can replace fossil-based chemicals in beauty and healthcare products, as well as in paints. FineCell is a spinout of the KTH Royal Institute of Technology in Stockholm, Sweden.

 

خواندن ادامه مطلب

Saica Group invests more than 100 million euros in a new corrugated board plant

Saica Group invests more than 100 million euros in a new corrugated board plant in Barcelona.

Work has begun on Saica Group’s new corrugated board factory in Barcelona, which will start operating in the spring of 2025. Located in the municipality of Sant Esteve Sesrovires, the plant will combine the operations currently carried out at Saica Pack El Prat and Saica Pack Barcelona. The new project involves an investment of more than 100 million euros and aims to increase the current joint production of the two factories by up to 45%.

This facility not only signifies a pivotal benchmark for innovation and sustainable packaging solutions, but it also addresses the evolving market demands and spatial constraints of our existing facilities. Additionally, this investment underscores Saica Group’s long-term commitment to the southern European packaging market and will ensure Saica can support its customers’ plans for growth.

 

خواندن ادامه مطلب

Rottneros invests in Blue Ocean Closures

Rottneros AB, one of the world’s leading suppliers of first-class market pulp, is now investing inBlue Ocean Closures and becomes a co-owner of the Swedish start-up, developing proprietaryfiber-based packaging materials.

Since just two years, Blue Ocean Closures AB has developed technology to produce fiber-based closures for consumer packaging at large scale, aiming to replace current plastic solutions on a global market. The innovative technology and material have potential for many more high volume use cases and making an impact in terms of reducing plastic pollution and its climate effects.

– “Blue Ocean Closures is leading the way in a very exciting new field with their vacuum press forming technology. At Rottneros we see this field as complementary to our work in wet moulding and exploring the opportunities within dry processes fits very well with our market strategy” says Lennart Eberleh, CEO, Rottneros AB.

 

خواندن ادامه مطلب

Valmet to supply automation and quality control systems to Union Paper Mills in Dubai

Valmet will supply Valmet DNA Distributed Control System (DCS) and Valmet IQ Quality Control System (QCS) with the latest web-based Valmet DNA User Interface to Union Paper Mills’ paper machine PM 2 in its Dubai facility, in the United Arab Emirates.

Union Paper Mills selected Valmet’s automation systems based on a successful previous project conducted in 2017 for the automation of paper machine PM 3 in its Al Dhafra facility in Abu Dhabi. The new systems will replace the existing DCS and QCS from another supplier and enable the mill to improve the operating efficiency and optimize the end-product quality with the latest automation technology.

The order was included in Valmet’s orders received of the third quarter 2023. The delivery and start-up will take place in 2024. The value of the order is not disclosed.

 

خواندن ادامه مطلب

ABB wins automation and drive system scope of supply for Gascogne Papier’s new paper machine project

ABB has been selected as a project partner for the installation of the world’s widest uncoated machine-glazed (MG) paper machine at Gascogne Papier’s kraft pulp and paper production plant in Mimizan, France.

Replacing three older machines, the facility’s PM7 will be fully integrated and standardized using the ABB Ability™ System 800xA® distributed control system (DCS), the ABB Quality Control System (QCS) for pulp and paper, drives and motors. Advanced QCS controls will enable automatic grade changes and multivariable cross-direction. The full scope of supply includes 8000 I/O, ACS880 multi-drives and ABB’s energy-efficient SynRM IE5 motors. The package will help Gascogne Papier save on energy costs while simultaneously reducing waste by making more on-spec paper.

ABB’s technologies will be used on the new paper machine that has a web width of 6.8 meters and a design speed of 1,300 meters per minute. It will be capable of producing 125,000 tons per annum of basis weight paper between 25 and 120 grams per square meter, setting a new industry benchmark for uncoated MG papers.

“We have an established relationship with Gascogne and are delighted to continue supporting them in their mill production goals,” said Pamela Murphy, European Operations Manager for Pulp and Paper at ABB. “The project also underscores our important collaboration and the complementary technology and expertise that we will bring to Gascogne.”

IE5 ultra-premium SynRM motors are the same size and output power as commonly used IE2 induction motors but offer up to 50 percent lower energy losses and significantly lower energy consumption. Additional benefits include lower bearing and winding temperatures for enhanced reliability and long life, and less motor noise. They can be used in a wide range of demanding industrial applications for accurate control and high efficiency a range of speeds.

ABB began deliveries early in 2023, with QCS and drives deliveries to Gascogne planned for 2024, along with commissioning of the machine.

خواندن ادامه مطلب

PA Consulting acquires the first Scala machine for PulPac’s Dry Molded Fiber technology

PA Consulting, a global leader in innovation and transformation consulting, reinforces its pivotal position in sustainable packaging by acquiring the first PulPac Scala production line. This cutting-edge technology, based on PulPac’s ground-breaking Dry Molded Fiber technology, sets a new benchmark for sustainability in the packaging industry.

Tony Perrotta, Partner, Sustainability & The Regenerative Economy at PA Consulting, expressed excitement about the new platform: “By acquiring a PulPac Scala machine, we are taking another step in bringing sustainable Dry Molded Fiber packaging to life. The production line is now fully commissioned onsite in Cambridge, UK, and will enable us to better serve global Brands with end-to-end production capabilities– from feasibility to market launch volumes.”

 

خواندن ادامه مطلب

Andritz to increase mechanical pulp production at Dezhou Taiding with another high-performance line

Andritz has received an order from Dezhou Taiding New Material Science and Technology Co., Ltd., China, to deliver a second chemi-thermomechanical (P-RC APMP) line to the mill in Pingyuan County, Dezhou City, Shandong Province, China.

The Andritz fiberline already installed at the mill supplies the company’s paper machines producing printing and writing paper and board grades. It has been operating successfully since 2021.

Zhang Qingchao, Vice General Manager of Production, Dezhou Taiding, says: “The ANDRITZ P-RC APMP line at our mill has consistently shown top fiber quality, remarkably low energy and chemical consumption, and high operational reliability. It was clear for us to partner with ANDRITZ again for our capacity increase.”

 

خواندن ادامه مطلب

Suzano again selects Andritz solution for major fluff pulp expansion project

Andritz has received a follow-up order from Brazilian pulp and paper producer Suzano for a major conversion project at the Limeira pulp mill. The project will enable Suzano to increase its eucalyptus-based fluff pulp production capacity from 100,000 to 440,000 tons per year to meet the growing global demand for personal hygiene products. Suzano is the only company in the world producing fluff pulp from hardwood – based on ANDRITZ technology.

Andritz will convert a pulp drying line for bleached hardwood kraft pulp (BHKP) into a line that can switch between BHKP and Suzano’s Eucafluff® pulp. With this project, Suzano continues to expand its highly successful Eucafluff business, which began eight years ago when ANDRITZ converted one of the company’s paper machines to produce fluff pulp from eucalyptus. This was the first time fluff pulp was produced from hardwood, and the rebuilt machine has been running at full capacity ever since. The Eucafluff brand is now well known in the hygiene market as an innovative and sustainable solution. It is approved for use in disposable care products that meet the strict criteria of the EU Ecolabel and the Nordic Swan label for high environmental standards throughout the life cycle of a product.

 

خواندن ادامه مطلب

ProJet to deliver four ProCleaners for Cartiera Pirinoli S.C.

ProJet b.v. is ready for delivery of 4 ProCleaners (Power Cleaners) for Cartiera Pirinoli S.C.

The ProCleaner Type F (Forming Fabrics – Power Cleaner) uses a single traversing head that cover the fabrics faster than the existing conventional oscillating showers. The goal is to achieve substantial water savings because the ProJet b.v. Power Cleaner uses only 5.0 litre/min of water; a conventional shower consumes over 160 l/min.

خواندن ادامه مطلب

The Pulp & Beyond 2024 conference program is released

The Pulp & Beyond 2024 Conference will bring together key people in the forest industry on 9 April 2024 at the Helsinki Expo and Convention Centre. The program for the three-part conference has now been published, focusing this time on innovative wood-based products, carbon zero future mills, and international control systems.

خواندن ادامه مطلب

Pulp & Beyond 2024

Pulp & Beyond is the leading forum bringing together the latest forest-based bioeconomy innovations, products, services and technologies as well as key people throughout the ecosystem.

 

خواندن ادامه مطلب