Klabin has officially recognized ANDRITZ for its technical expertise and project management performance during the Puma II pulp and paper mill expansion project in Ortigueira, Brazil.
خواندن ادامه مطلبآرشیو برچسب های: Andritz
09
دی
دی
Andritz has received an order from Papel Prensa S.A. to supply a complete old corrugated containers (OCC) line including a reject handling system to its mill in Buenos Aires, Argentina.
In its initial production phase, the new line will process 180 t/d of local OCC. The line’s processing capacity can be easily increased through a minor adjustment to configuration to support the expected rise in pulp demand for the production of corrugated paper. The new line will provide high pulp quality at cost-efficient and resource-saving operation, with the latest technology available.
Diego Colabardini, CEO of Papel Prensa S.A., says: “Our goal is to produce top-quality paper while reducing our environmental footprint through the efficient use of energy and natural resources, based on our strategy of promoting circular economy in a sustainable business. ANDRITZ’s advanced technology and extensive experience in pulping will help us achieve this goal.”
ANDRITZ’s scope of supply comprises
- the complete LC pulping system with a FibreSolve FSR pulper and an innovative detrashing system to ensure superior slushing of the raw material at minimum fiber loss
- the protection cleaning, fractionation and screening stage including a PrimeScreen X with newly developed PrimeRotor for high screening efficiency at lower power consumption
- an innovative reject handling system featuring a Reject Compactor ReCo to dewater the rejects to the highest possible dry content
- erection supervision, commissioning, start-up, and training
Start-up of the new line is scheduled for 2024.
خواندن ادامه مطلب
05
دی
دی
Andritz has received an order from Kartogroup España S.L. to supply a new high-temperature PrimeDry Hood HT and an air system for a tissue machine rebuild at the mill in Burriana, Spain.
Start-up is scheduled for the first quarter of 2024.
The new gas-heated hood will enable Kartogroup to achieve a higher drying capacity with a hood design impingement temperature of 530°C, a higher heat transfer rate and a significant reduction of energy consumption per ton of paper produced.
The special set of advanced solutions for the drying section rebuild include optimized impingement distribution of the hood nozzle boxes, a heat recovery system, a state-of-the-art burner management system and Yankee head insulation. Representing ANDRITZ’s latest developments in tissue drying technology, these solutions maximize the heat transfer rate, ensure higher safety, lower emissions and significantly reduce steam consumption.
اخبار خارجی
Andritz to increase mechanical pulp production at Dezhou Taiding with another high-performance line
25
آذر
آذر
Andritz has received an order from Dezhou Taiding New Material Science and Technology Co., Ltd., China, to deliver a second chemi-thermomechanical (P-RC APMP) line to the mill in Pingyuan County, Dezhou City, Shandong Province, China.
The Andritz fiberline already installed at the mill supplies the company’s paper machines producing printing and writing paper and board grades. It has been operating successfully since 2021.
Zhang Qingchao, Vice General Manager of Production, Dezhou Taiding, says: “The ANDRITZ P-RC APMP line at our mill has consistently shown top fiber quality, remarkably low energy and chemical consumption, and high operational reliability. It was clear for us to partner with ANDRITZ again for our capacity increase.”
23
آذر
آذر
The Pulp & Beyond 2024 Conference will bring together key people in the forest industry on 9 April 2024 at the Helsinki Expo and Convention Centre. The program for the three-part conference has now been published, focusing this time on innovative wood-based products, carbon zero future mills, and international control systems.
خواندن ادامه مطلباخبار خارجی
Andritz to supply dewatering and dispersing equipment to Rondo Ganahl’s paper mill in Austria
16
آذر
آذر
Andritz has received an order from Rondo Ganahl AG to supply dewatering and dispersing equipment to be installed in its paper mill in Frastanz, Austria.
Start-up is scheduled for end of 2024.
This upgrade will help the customer make his paper mill fit for the future to meet growing demands in the production process. ANDRITZ will replace the complete dewatering and dispersing equipment, which will increase the capacity of the system up to 230 bdt/d. Centerpiece of the new technology will be a Twin Wire Press, type TWP2833L, which will feature a custom-tailored modular design optimized for the limited space conditions at the installation site. The ANDRITZ Twin Wire Press is perfectly suited for dewatering all types of fibers, but especially when a high pulp dryness or the separation of water loops are required. ANDRITZ will also provide the basic engineering, supervision of erection, commissioning, and start-up as well as the operator training.
اخبار خارجی
ANDRITZ complements its process control product portfolio by acquiring NAF valve business
14
آذر
آذر
ANDRITZ has signed an agreement with Flowserve Corporation based in Texas, USA, to take over its
NAF AB engineers, designs and builds Flowserve’s NAF control valve portfolio. It is a leading supplier with long-standing experience in providing process control valves for pulp and paper and other related industries. With 50 employees at the facility in Linköping, Sweden, it has been a successful provider of process control valves for more than 100 years.
This acquisition further extends and strengthens ANDRITZ’s product and service portfolio in the field of process control. With this acquisition, ANDRITZ, a leading provider of process control and automation systems for complete pulp and paper mills, is adding control valves to its portfolio of process actuators, analyzers, and measurement equipment for the pulp and paper making process. For many years, ANDRITZ has successfully equipped its production plant and equipment deliveries with NAF control valves.
خواندن ادامه مطلب
27
آبان
آبان
Andritz will supply a methanol liquefaction plant to Japanese unbleached kraft pulp producer Hyogo Pulp Industries Ltd. The plant will be installed at the Tanigawa mill to replace fossil-based support fuel with renewable liquid methanol, a by-product of the chemical recovery process. This is the first plant of its kind in the Japanese pulp industry.
“With this investment, we are taking our first step toward becoming a biorefinery,” said Naoki Ikawa, Representative Executive Director of Hyogo Pulp Industries, Ltd.
اخبار خارجی
Gutex produces first fibers for insulation board with new Andritz fiber preparation system
13
آبان
آبان
Wood fiber insulation board manufacturer Gutex has successfully produced first fibers with its new ANDRITZ fiber preparation system in Eschbach, Germany. This is the second system ANDRITZ has delivered to GUTEX.
Oliver Bauch, Plant Manager, GUTEX, says: “The new line will perfectly support the environmentally friendly production approach for our ecological insulation board products. Thanks to the excellent cooperation and the great effort of the whole ANDRITZ team we were able to produce first fibers even ahead of schedule.”
Michael Rupp, Vice President for Panelboard Systems, ANDRITZ, adds: “We are proud that GUTEX again chose to collaborate with us and that we had the opportunity to provide them with our complete front-end technology.”
خواندن ادامه مطلب
30
مهر
مهر
Andritz will relocate and upgrade a fiberline for Yueyang Forest & Paper to produce premium quality fibers for its new paper machine. The P-RC APMP (Pre-Conditioning Refiner Chemical Alkaline Peroxide Mechanical Pulp) line was originally supplied by Andritz in 2011 to the mill in Yuanjiang city, Hunan province. Andritz will now transfer it to Yueyang city, Hunan province, where it will process mixed hardwood for the production of printing and writing papers.
By adding new high-efficiency equipment and refurbishing existing machines, the upgrade will raise the line’s minimum design capacity to 650 admt/d and improve fiber quality while saving energy and chemicals. Start-up is scheduled for the second half of 2024.
28
مهر
مهر
Andritz has received an order from the pulp and paper producer The Navigator Company to supply a new recovery boiler, new ash leaching system and an upgrade of the non-condensable gases (NCG) collection and incineration system for its pulp mill in Setúbal, Portugal. ANDRITZ will execute the order on a turn-key basis with start-up scheduled for the first quarter of 2025.
Andritz’s sustainable technologies improve mills’ environmental performance and support Navigator’s Responsible 2030 Agenda.
The non-condensable gases (NCG) collection and incineration system is part of ANDRITZ’s CircleToZero initiative that focuses on eliminating unused side streams, create new added-value products and lay a foundation for zero emissions and zero waste production.
خواندن ادامه مطلب
26
مهر
مهر
Andritz has received an order from the pulp and paper producer The Navigator Company to supply a new recovery boiler, new ash leaching system and an upgrade of the non-condensable gases (NCG) collection and incineration system for its pulp mill in Setúbal, Portugal. ANDRITZ will execute the order on a turn-key basis with start-up scheduled for the first quarter of 2025.
Andritz’s sustainable technologies improve mills’ environmental performance and support Navigator’s Responsible 2030 Agenda.
The non-condensable gases (NCG) collection and incineration system is part of ANDRITZ’s CircleToZero initiative that focuses on eliminating unused side streams, create new added-value products and lay a foundation for zero emissions and zero waste production.
23
مهر
مهر
Andritz will supply a pressurized refining system to Sonae Arauco Deutschland GmbH’s mill in Meppen, Germany, to produce wood-based insulation products. This will be the 15th insulation board production line equipped with an ANDRITZ pressurized refining system, confirming ANDRITZ’s strong position in the industry.
The new line will process a mixture of wood chips from different types of timber to produce insulation boards for the construction industries. Start-up is scheduled for 2025.
خواندن ادامه مطلب
اخبار خارجی
Andritz to rebuild Holmen paper machine for flexible production of book and packaging paper
19
مهر
مهر
Andritz will rebuild a paper machine at Holmen Paper’s Braviken mill in Sweden to provide maximum production flexibility.
Start-up is planned for autumn 2024.
This order follows Holmen Paper’s recent successful entry into the packaging market with an innovative lightweight corrugated board product. The rebuild of PM52 will enable Holmen Paper to increase the production of fluting for corrugated boxes. ANDRITZ will implement a sophisticated technology concept allowing to easily switch production between the different paper grades.
17
مهر
مهر
Andritz will supply a complete fiber preparation line for a greenfield plant in the Toshka area in the south of Egypt. The pioneering and eco-friendly plant will produce high-density and medium-density fiberboard (HDF/MDF) from date palm fronds, a material normally considered farm waste.
Andritz will execute this order in cooperation with the engineering, procurement and construction (EPC) specialist WESER Industrie- und Anlagentechnik GmbH and DIEFFENBACHER GmbH Maschinen- und Anlagenbau, a leading manufacturer of press systems and complete plants for the wood-based panel industry. On behalf of Egypt’s National Service Projects Organization (NSPO), the German company WESER is acting as the general contractor for this turnkey project.
خواندن ادامه مطلب
28
شهریور
شهریور
Mondi plc announces that it has entered into an agreement to sell its last remaining facility in Russia, Joint Stock Company Mondi Syktyvkar, together with two affiliated entities to Sezar Invest LLC for a total cash consideration of RUB 80 billion.
Mondi confirms that both the Russian Federation’s Federal Anti-Monopoly Service and Government Sub-Commission for the Control of Foreign Investments have approved the Disposal on the terms agreed between Mondi and Sezar Invest. Mondi also confirms that it has been informed that there are no further outstanding regulatory conditions in respect of the Disposal.
The total cash consideration of RUB 80 billion will be paid to Mondi in RUB and in six monthly instalments. The first four monthly payments will be for RUB 13.5 billion each, with the first payment made by the end of September 2023.
اخبار خارجی
Lotus Teknik Tekstil invests in Andritz digitalization platform for its new nonwovens line
13
شهریور
شهریور
The Metris All-in-One platform developed by ANDRITZ provides full support for industrial plants throughout their entire life cycle. It combines a complete range of functionalities for professional production management, simulation and optimization using the latest artificial intelligence methods, plus cyber security, and condition monitoring with smart sensors in an integrated approach.
It will support Lotus Teknik Tekstil in further optimizing the operating efficiency of its ANDRITZ Wetlace CP line by:
- ensuring a stable production process via data collection and process monitoring,
- reducing operational costs through optimized production traceability and energy monitoring,
- improving final product quality thanks to a stable process, and
- reducing production waste by optimizing raw material management.
خواندن ادامه مطلب
12
شهریور
شهریور
ANDRITZ has received the ninth order for a PrimePress X shoe press from Lee & Man Paper Manufacturing Ltd.
According to ANDRITZ, the new shoe press will help the paper producer save energy and further improve paper quality at its Best Eternity Recycle Technology mill in Banting, Malaysia.
The newly ordered shoe press will be installed in PM26, a containerboard machine that runs at a design speed of 1,000 m/min and produces high-quality Testliner of 70 – 160 gsm basis weight.
The PrimePress X shoe press will replace the existing conventional third nip in the center roll-based concept.
خواندن ادامه مطلب
11
شهریور
شهریور
Dissolving pulp producer Sappi Saiccor signed a three-year service contract with technology group Andritz for two recovery boilers operating at the mill in Umkomaas, South Africa.
The two Andritz boilers producing 230 tph of steam at 490°C and 86 bar have been operating since 2008 and 2021 respectively. The service agreement will help the Saiccor mill maintain safe and efficient operation while improving the reliability and availability of the boilers.
The scope includes operation support, engineering support, pre-shutdown services and annual shutdown services such as mechanical and process inspection, as well as an advisory service for boiler washing and boiler repair and replacement works.
Saiccor mill, situated 50 km south of the port of Durban, produces elemental chlorine free (ECF) dissolving pulp (DP), mostly for the export market. It is one of the production facilities of Sappi group, a leading global provider of everyday materials made from wood fiber-based renewable resources.
06
شهریور
شهریور
Andritz has received an order for a new HERB recovery boiler including advanced digitalization solutions to be installed at Moorim P&P’s pulp and paper mill in Ulsan, South Korea.
The delivery will increase the economic and environmental sustainability of the mill’s operations.
The contract signed with power plant supplier SGC eTEC E&C includes the engineering and main equipment supply for the boiler, digitalization solutions (ANDRITZ autonomous recovery boiler solutions) for maximum use of the boiler’s potential, and an ash treatment system.
Replacing two existing boiler units, the new HERB boiler will enable more efficient chemical recovery from the black liquor at lower emissions. Together with a new steam turbine, it will also significantly increase the mill’s renewable energy production. Thus, the delivery will make mill operations more self-sufficient, economical and sustainable. HERB recovery boilers are part of ANDRITZ’s broad portfolio of sustainable products that the company keeps advancing and expanding.
This order is a result of a long-lasting cooperation – ANDRITZ has provided process upgrades to Moorim P&P’s boilers for several years. “Our collaboration with ANDRITZ has already brought valuable continuous improvements to our Ulsan mill,” says Kim Sangwoo, Executive Director, Moorim P&P.
“This order is taking our relationship with Moorim P&P to the next level. We at ANDRITZ are grateful for the trust placed in our team and our technology,” said Henrik Wikstedt, Vice President, Recovery Boilers at ANDRITZ.
Moorim P&P’s Ulsan mill produces bleached kraft pulp and different types of high-quality paper. Established in 2011, it is Korea’s first and only integrated pulp and paper mill.
خواندن ادامه مطلب- 1
- 2